![]() If a motor vehicle is equipped with an outside mirror on each side of the vehicle that reflects to the vehicle operator a view of the roadway for a distance of at least 200 feet from the rear of the vehicle then there are no restrictions regarding the sunscreening devices applied to the rear window. Rear WindowĪ sunscreening device can be applied to the rear window of the vehicle if the following conditions are met. These windows are completely exempted from regulation under the Texas Transportation Code. Sunscreening devices, when measured in combination with the original glass, have a luminous reflectance value of 25% or less. Sunscreening devices, when measured in combination with the original glass, have a light transmittance value of 25% or more. Sunscreening devices can be applied to the side windows to the right and left of the driver if the following conditions are met. Side Windows to The Right and Left of The Driver Sunscreening devices, when measured in combination with the original glass, must have a luminous reflectance value of 25% or less.Ī clear (un-tinted) UV film is allowed anywhere on the front windshield without a medical exemption being required. Sunscreening devices, when measured in combination with the original glass, must have a light transmittance value of 25% or more. Sunscreening devices may not be red, amber, or blue in color. If there is no AS-1 line, sunscreening devices must end five inches below the top of the windshield. Sunscreening devices must be applied above the AS-1 line. Sunscreening devices can be applied to the windshield if all of the conditions below are met. ![]() NOTE: Windows immediately to the right and left of the driver that have less than 25% light transmission will fail inspection, regardless of the model year of the vehicle. The Silver 70% is virtually transparent.Window Tint Standards can be found in the Texas Administrative Code, Title 37, Part 1, Rule 21.3. The best solution is to install a light outside the shines onto the glass and to install a reflective film, Silver 5% or 15% along with a second layer of non-reflective/automotive film 5% on top of the reflective layer. ![]() At night when lights are on inside, one cannot see out but outside, people can see into the home or building. During the day when the light is shining outside one can see out and it is hard for outsiders to see inside. Note: The “One-way mirror effect,” or “so you can see out, but nobody can see in,” is all about the “lighting.” Window film on glass works much like regular glass. 5% – Very Reflectiveħ0% – Light Silver 70% is virtually transparent The lower the Shade, the darker (more reflective) the film. Silver 50 is an outstanding high-light transmission window film fantastic solar performance specifications while delivering the preferred appearance for residential applications. ![]() The 20 and 35 percent versions are extremely popular for commercial applications. ![]() Filters out virtually all UV rays, helping to protect fabrics and furnishings. Offers one-way daytime privacy for security or to screen unsightly areas. Silver Reflective gives an external mirrored appearance to glass which can upgrade the appearance of a building. Creates a more comfortable environment and can reduce tiredness and eyestrain. Can lead to a reduction in air conditioning costs and hence a reduction in energy costs. It reduces high levels of incoming solar heat and glare coming in through your glass, which can significantly improve working/living conditions. Silver reflective Window Films are one of the best performing and most widely used solar control window films. Silver Reflective / Mirror Tint 5%, 15%, 35%, 50%, 70% (Warranty: Residential- Lifetime. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |